Chapter 12 Routine operation
Page 12.11
How to print a report 1. Referring to the diagram, select “Print reports”.
2. Select to print either an Alarm Log or Current Report. (There is a third selection - “Idle” - which lets you
leave the menu without a report being printed.) The report is printed immediately.
Some typical reports CURRENT REPORT
================
PRT input channel 1 0 Deg.C SET
TIME PERIOD I/P 3B 0 nS SET
************* END OF REPORT ******************
ALARM LOG REPORT
==================
1995/01/02 00:11:17 OFF # Alarm power out SYSTEM
1995/01/02 00:05:46 ON # Alarm power out SYSTEM
1995/01/01 23:59:50 OFF # DBM corrupt sig. SYSTEM
1995/01/01 23:59:49 ON # Aout no cal 4 SYSTEM
1995/01/01 23:59:49 ON # Aout no cal 3 SYSTEM
1995/01/01 23:59:49 ON # Aout no cal 2 SYSTEM
1995/01/01 23:59:49 ON # Aout no cal 1 SYSTEM
1995/01/01 23:59:49 OFF # Alarm power out SYSTEM
1995/01/01 23:59:33 ON # Alarm power out SYSTEM
1995/01/01 23:59:49 ON # DBM corrupt sig. SYSTEM
PRT input channel 1 0 Deg.C SET
TIME PERIOD I/P 3B 0 nS SET
Turb2 err increment 0
Analog 7 Input mode 4-20mA input
************ END OF REPORT ********************