Chapter 14 Removal and replacement of parts
Page 14.6
14.10 Mother Board Warning:
It is strongly recommended that in order to ensure continued compliance to EMC directives,
you do not attempt to remove the rear panel assembly, but return the instrument to the factory.
1. Remove the Rear Panel Assembly as described in Section 14.9.
2. Referring to the diagram, undo and remove the six screws and washers which fix the Mother board to the
rest of the Rear Panel Assembly.
3. Using a straight pull, carefully lift the Mother Board clear of its four connections to the connector board. The
Mother Board is now free.
4. Replace all items by reversing this procedure. Take great care to ensure that the cables are not pinched on
re-assembly, and ensure that the metal clips are not bent or damaged.
C
O
MPLETE A
S
S
EMBLY DISMANTLEDASSEMBLY
Mother
Board
Threaded
spacers
Connector
Board
Rear
Panel
Earth stud
and fixin
g
s
Screws and
washers
Rear
panel
Plain
spacers
Figure 14.7: Removal of the Mother Board and Connector Board