Chapter 6 The keyboard, display and indicators
Page 6.4
In VIEW mode, the buttons that you can use are:
‘a’button On/off toggle for displaying the parameter’s unique identification number
(location ID). This is displayed to the left of the status indication on line 4.
‘b’button Puts the 795x into EDIT mode so that you can edit the data on line 2. The
data being edited is left justified whilst in EDIT mode. (See next section)
‘c’button Puts the 795x into EDIT mode so that you can select from a list of the units
in which the data can be displayed. The units are left justified whilst in
EDIT mode. (See next section)
‘d’button Puts the 795x into EDIT mode so that you can select a status (Set or Live).
The status is left justified whilst in EDIT mode. (See next section)
STREAM / RUN
SELECT
If there is more than one stream (metering-run) and there is a number on
the far left of display line 4, this button will select another stream (metering-
run). The screen will be refreshed with attributes (value, units and status)
for that stream (metering-run).
BACK Returns you to the previous step.
MAIN MENU Takes you straight to page 1 of the top-level menu.
6.7 Using the buttons to edit information
You can:
• Edit text.
• Select an option from a multiple-choice list.
• Edit numerical information.
• Edit the date and time.

6.7.1 Text editing

Once in EDIT mode (see earlier), the buttons that you use to edit text are:
LEFT-ARROW Moves the cursor to the left, along the line of text you are editing.
RIGHT-ARROW Moves the cursor to the right, along the line of text you are editing.
UP-ARROW This button changes the character at the current cursor position. It scrolls
forwards through the alphanumeric character set. Stop when the
character you want is displayed.
DOWN-ARROW Changes the character at the current cursor position. It scrolls
backwards through the alphanumeric character set. Stop when the
character you want is displayed.
:

0 - 9buttons Each button en ters a single digit.

‘b’button If you are satisfied with the changes you have made, press b to accept the
changes and go back to VIEW mode. (The ENTER button also does this.)