Chapter 10 Configuring your instrument by using wizards
Page 10.4
10.5 Set-up Wizard Selection Map After using the menu to arrive at the wizard sub-menu, as shown earlier in Figure 10.1, a wizard option can be
chosen.
Selection
Procedure
1. Press the b-button to begin the selection process.
2. Use the up/down arrow buttons to cycle through all the available wizard
options.
3. Press either the b-button or the enter button to select the wizard option that
presently appears on the 795x display.
4. Examine and then follow directions provide d alongside the prompt of the
selected wizard option,
Selecting this, with the 'B'-key, starts the wizard selection process.
Use scroll up/down arrow keys to move through the wizard options.
Setup wizard
(Selection)
Select option
Initialise
Multi-view
Alarms
Analogue outputs
Special Calc.
Transmitters
Pressure
Temperature
Specific gravity
Base density
Line density
Choosing this causes configured data to
be restored to default values
SG 1 & 2
SG 2
SG 1
Density 1 & 2
Density 2
Density 1
Full Setup
Turn to page 10.30
Turn to page 10.29
Turn to page 10.28
Turn to page 10.27
Turn to page 10.24
Turn to page 10.22
Turn to page 10.20
Turn to page 10.18
Turn to page 10.16
Turn to page 10.13
Turn to page 10.12
Turn to page 10.11
Turn to page 10.10
Refer to "Density 1" and "Density 2" wizard maps.
Turn to page 10.8
Turn to page 10.6
Turn to page 10.31
Figure 10.3: Set-up Wizard Selection