Analogue and Atsc digital signals from | Emprex HD-3701P manual

The steps required to automatically program the product are outlined as below:

1.Press or keys to the CHANNEL and enter the password (Default: “0000”).

You will see three sub-menus:

Edit

Auto Scan

Manual Scan

2. Press or button to highlight AUTO

SCAN and then press “OK” to launch

the auto scan. The AUTO-SCAN win-

dow shows the SCAN status.

3. The scanning will search for both NTSC

analogue and ATSC digital signals from

channel 2 to channel 69. The percentage

bar shows the progress made.

4. Once the digital TV signal is scanned,

the channel number and the program

name will be shown on the “Scan List”.

5. It takes about three minutes to complete

the scanning process.

6. When the scanning is complete, press

Channel Caption

Password

Channel Caption

Edit

Auto Scan

Manual Scan

Channel Caption

Setup Lock

Setup Lock

Setup Lock

“EXIT” to leave this window or press

“DTV MENU” to exit the menu system.

Auto Scran

03-0 OFF-AIR

05-0 OFF-AIR

02-1 SBC2-D1

02-2 SBC2-D2

23-0 OFF-AIR

30-3 PBS1DTV

6 channels found.

Auto Scan complete. Press (Menu) Key to exit

44

Image 45

Emprex HD-3701P manual Analogue and Atsc digital signals from, Channel 2 to channel 69. The percentage, Scanning process

Contents

Model Number HD-3701P Setting Up Your Television Before Using This ProductDTV Setup and Connections Introduction Your Television Setting Up the DTV About This Manual CopyrightTrademarks Canada Class B Statement FCC Compliance Do not use this apparatus near water and moisture Ground Clamps Risk of Electric Shock Do not Open Page Page Distance recommendations Cleaning the screen Following items come along with your LCD TV Button Above AAA VOL Table below explains each button’s function Hdmi LCD R MTS Hdmi Source AV1 AV2 DVD player Source AV1 LCD TV Source AV1 AV2 Atsc Component Source AV1 AV2 Video Mode Video Audio Screen Options Chip Press Use or to Custom Press to contrast and press OKor to select Mode How to set the parameters in the video mode menu Balance How to set the parameters in the audio menu Display Mode How to set the parameters in the screen menu User might also choose panoramic Display Modes Adding and Erasing Channels TV/CATV Blue Screen How to set the parameters in the options menu Chip Unrated Program Change Password How to set the parameters in the V-Chip menu Setting Up TV Rating Limits That is highlighted Means that the selection can Setting Up Movie Rating Limits Changing the Password Mpaa Movie Rating Descriptions TV Rating Descriptions Main mode Atscant Channel Initial ScreenKey and then select Channel to run Once the digital TV signal is scanned Analogue and Atsc digital signals fromWhen the scanning is complete, press Channel 2 to channel 69. The percentage Memorizing Channel Manually Press the OK key on no to can- cel the change Edit Channel Font Size Aption Closed-Caption OptionsFont Style Closed Caption Background Color Closed Caption Foreground Opacity Closed Caption Background OpacityEdge Style Edge Color Format Screen Format Setup Setup Screen Formating and Aspect Ratios TV Type ResolutionAspect Ratio Select Opacity Changing the Transpar Ency of the On-Screen-Display Sound Digital Audio Output Set Ting Time Zone Plate Changing the Display Time Information-Plate About Lock Mpaa Movie Rating Descriptions NAB TV Rating Descriptions Resetting the Data to Default Changing the Password Audio System Dolby 5.1 or PCM -Program Rating Information Now Current EPG MTS/Audio Extended Program Information Press the EPG button to display the EPG window Channel Guide Closed Caption There is just noise There is no picture or soundColor abnormal or improper Picture is too bright Possible Solution SDTV/HDTV Hdmi input Chip menu block Size, H position- screen menu Horizontal Prog- TV controls program VOL- remote control/TV control Volume ONE Year Limited Warranty Parts No -4T562