Enterasys Networks N Standalone (NSA) Series

IP Configuration Command Set

Configuring Dynamic Host Configuration Protocol (DHCP)

12-112 Matrix NSA Series Configuration Guide

Commands

The commands used to configure DHCP are listed below and described in the associated section as

shown:

•ip dhcp server (Section 12.2.9.1)

•ip local pool (Section 12.2.9.2)

•exclude (Section 12.2.9.3)

•ip dhcp ping packets (Section 12.2.9.4)

•ip dhcp ping timeout (Section 12.2.9.5)

•ip dhcp pool (Section 12.2.9.6)

•domain-name (Section 12.2.9.7)

•dns-server (Section 12.2.9.8)

•netbios-name-server (Section 12.2.9.9)

•netbios-node-type (Section 12.2.9.10)

•default-router (Section 12.2.9.11)

•bootfile (Section 12.2.9.12)

•next-server (Section 12.2.9.13)

•option (Section 12.2.9.14)

•lease (Section 12.2.9.15)

•host (Section 12.2.9.16)

DHCP Host

Configuration

Mode

Configure DHCP

host parameters. Type

client-identifier and

the identifier, or

hardware-address

and an address from

any DHCP

configuration mode.

Matrix>Router1

(config-dhcp-host)#

Table 12-12 DHCP Command Modes (Continued)

Mode Usage Access Method Resulting Prompt