Enterasys Networks N Standalone (NSA) Series 2.2.3.31 show logout

General Configuration Command Set
Setting Basic Device Properties
2-80 Matrix NSA Series Configuration Guide
2.2.3.31 show logout
Use this command to display the time (in seconds) an idle console or T elnet CLI session will remain
connected before timing out.
show logout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the CLI logout setting:
Matrix(rw)->show logout
Logout currently set to: 10 minutes.