Security Configuration Command Set
Configuring MAC Locking
Matrix NSA Series Configuration Guide 14-121
14.3.9.2 show maclock stations
Use this command to display MAC locking information about end stations connected to the device.
show maclock stations [firstarrival | static][port-string]
Syntax Description
Command Defaults
If no parameters are specified, MAC locking information will be displayed for all
end stations.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for the en d stations connec ted to all
Fast Ethernet ports in module 2:
firstarrival (Optional) Displays MAC locking information abou t end
stations first connected to MAC locked ports.
static (Optional) Displays MAC locking information about
static (management defined) end stations connected to
MAC locked ports.
port_string (Optional) Displays end station information for specified
port(s). For a detailed description of possible port_string
values, refer to Section 4.1.1.
Matrix(rw)->show maclock stations fe.2.*
Port Number MAC Address Status State
------------ ----------------- -------------- --------------
fe.2.3 00-10-a4-e5-08-4e active first learned
fe.2.3 08-00-20-7c-e0-db active first learned
fe.2.6 00-60-08-14-4b-15 active first learned
fe.2.6 08-00-20-20-32-4b active first learned
fe.2.9 08-00-20-77-aa-80 active first learned
fe.2.12 00-03-ba-08-4c-f0 active first learned
fe.2.14 00-01-f4-2c-ad-b4 active first learned