Enterasys Networks N Standalone (NSA) Series 6.2.2.13 set spantree porthello

Spanning Tree Configuration Command Set
Configuring Spanning Tre e Port Parameters
Matrix NSA Series Configuration Guide 6-105
6.2.2.13 set spantree porthello
Use this command to set the hello time for one or more Spanning T ree ports. This is the time interval
(in seconds) the port(s) will transmit BPDUs.
set spantree porthello port-string interval
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the hello time to 3 seconds for port fe.1.4:
NOTE: This command can be executed only if bridge hello mode is disabled. For
information on using the set spantree bridgehellomode command, refe r to
Section 6.2.1.28.
port-string Specifies the port(s) for which to set hello time.
interval Specifies the number of seconds the system waits before
broadcasting a bridge hello message. Valid values are 1 -
10.
Matrix(rw)->set spantree porthello fe.1.4 3