Discovery Protocols Command Set
Enterasys Discovery Protocol
3-6 Matrix NSA Series Configuration Guide
Table 3-1 provides an explanation of the command output.
Table 3-1 show cdp Output Details
Output What It Displays...
CDP Global Statu s Whether CDP is globall y auto-enabled, enabled or disabl ed. The default
state of auto-enabled can be reset with the set cdp state command. For
details, refer to Section 3.2.2.2.
CDP Versions
Supported CDP version number(s) supported by the dev ice.
CDP Hold Time Minimum time interval (in seconds) at which CDP configuration
messages can be set. The default of 180 seconds can be reset with the
set cdp hold-time command. For details, refer to Section 3.2.2.5.
CDP Authentication
Code Authentication code for CDP discovery protocol. The default of
00-00-00-00-00 -00-00-00 can be reset using the set cdp auth
command. For details, refer to Section 3.2.2.3.
CDP Transmit
Frequency Frequency (in seconds) at which CDP messages can be transmitted. The
default of 60 seconds can b e reset with the set cdp interval command.
For details, refer to Section 3.2.2.4.
Port Port designation. For a detailed description of possible port-string
values, refer to Section 4.1.1.
Status Whether CDP is enabled, disabled or auto-enabled on the port.