Enterasys Networks N Standalone (NSA) Series 14.3.10.1 set multiauth mode

Security Configuration Command Set
Configuring Multiple Authenticatio n
Matrix NSA Series Configuration Guide 14-135
14.3.10.1 set multiauth mode
Use this command to set the system authentication mode to use multiple authenticators
simultaneously or to strictly adhere to 802.1X.
set multiauth mode {multi | strict}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to enable multiple authentication:
multi Allows the system to use multiple authenticators
simultaneously.
NOTE: This mode requires that MAC, PWA, and
802.1X authe nt icat ion be en a ble d glo b ally, and
configured appropriately on the desired ports per
its corresponding command set as described in
this chapter.
strict Sets the system authentication mode to strict 802.1X.
Matrix(rw)->set multiauth mode multi