Enterasys Networks N Standalone (NSA) Series 8.3.2 Assigning Classification Rules to Policy Profiles Purpose

Policy Classification Config uration Command Set
Assigning Classificati on Rules to Policy Profiles
8-22 Matrix NSA Series Configuration Guide
8.3.2 Assigning Classification Rules to Policy Profiles
Purpose
To review, assign and unassign classification and admin rules. Classification rules map policy
profiles to protocol-based frame filtering policies configured for a particu l ar VLAN or Class of
Service (CoS). Admin rules assign policy profiles to incoming traffic.
Commands
The commands used to review, assign and unassign classification rules to policy profiles and ports
are listed below and described in the associated section as shown.
•show policy rule (Section 8.3.2.1)
•show policy capability (Section 8.3.2.2)
•set policy classify
•set policy rule (Section 8.3.2.4)
•clear policy rule (Section 8.3.2.5)
•clear policy all-rules (Section 8.3.2.6)
•set policy port (Section 8.3.2.7)
•show policy allowed-type (Section 8.3.2.8)
•set policy allowed-type (Section 8.3.2.9)
•clear policy allowed-type (Section 8.3.2.10)
•clear policy port-hit (Section 8.3.2.11)