Enterasys Networks N Standalone (NSA) Series 6.2.1.38 clear spantree fwddelay

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-51
6.2.1.38 clear spantree fwddelay
Use this command to reset the Spanning Tree forward delay to the default setting o f 15 seconds.
clear spantree fwddelay
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to globally reset the bridge forward delay:
Matrix(rw)->clear spantree fwddelay