Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
11-112 Matrix NSA Series Configuration Guide
11.2.5.11 show mac
Use this command to display the timeout period for aging learned MAC addresses, and to show
MAC addresses in the switch’ s filtering database. These are addresses learned on a port through the
switching process or statically entered. To show port MAC addresses programmed into the device
during manufacturing, use the show port mac command as des c ribe d in Section 11.2.5.10.
show mac [agetime] [address mac-address] [fid fid] [vlan-id vlan-id]
[port-string port-string] [type {other | invalid | learned | self | mgmt}]
[field-decode] [-verbose]
Syntax Description
Command Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Command Mode
Read-Only.
agetime (Optional) Display the time in seconds that a learned MAC
address will stay in the filtering database.
address
mac-address (Optional) Displays a specific MAC address (if it is known
by the device).
fid fid (Optional) Displays MAC addresses for a specific filter
database identifier.
vlan-id vlan-id (Optional) Displays MAC addresses for a specific VLAN
based on the VLAN ID, for static multicast entries only.
port-string
port-string (Optional) Displays MAC addresses for a specific port or
range of ports. For a detailed description o f possible
port-string values, refer to Section 4.1.1.
type other |
invalid | learned |
self | mgmt
(Optional) Display MAC addresses defined as other,
invalid, learned, self or mgmt (management).
field-decode (Optional) Display the meanings of the fields in the show
mac comman d.
-verbose (Optional) Displays all MAC address information in detail.