General Configuration Command Set
Managing Configuration and Image Files
2-116 Matrix NSA Series Configuration Guide
2.2.8.6 delete
Use this command to remove an image or a CLI configuration file from the Matrix system.
delete filename
Syntax Description
Command Type
Switch.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to delete the “myconfig” configuration file from slot 3:
This example shows how to delete the “010300” image file:
NOTE: Use the show config command as descr ibed in Section 2.2.8.3 to display
current image and configuration file names.
filename Specifies the local path name to the file. Valid directories
are /images and /slotN.
Matrix(rw)->delete slot3/myconfig
Matrix(rw)->delete images/010300