Enterasys Networks N Standalone (NSA) Series 6.2.1.19 set spantree mstcfgid

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-31
6.2.1.19 set spantree mstcfgid
Use this command to set the MST configurati on name and/or rev ision level.
set spantree mstcfgid {cfgname name | rev level}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the MST configuration name to “mstconfig”:
cfgname name Specifies an MST configuration name.
rev level Specifies an MST revision level. Valid values are 0 -
65535.
Matrix(rw)->set spantree mstconfigid cfgname mstconfig