Port Configuration Command Set
Configuring Broadcast Suppression
Matrix NSA Series Configuration Guide 4-85
4.3.9.2 set port broadcast
Use this command to set the broadcast suppression limit, in packets per second, on one or more
ports. This sets a threshold on the broadcast traffic that is received and switched out to othe r ports.
set port broadcast port-string threshold-val
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set broadcast suppression to 800 packets per second on Fast Ethernet
ports 1 through 5 in port grou p 1:
port-string Specifies the port(s) for which to set broadcast
suppression. For a detailed description of possible
port-string values, refer to Section 4.1.1.
threshold-val Sets the packets per second threshold on broadcast traffic.
Maximum value is 1488100 for Gigabit and 148810 fo r
Fast Ethernet. If set to the maximum value, thresholding
will be disabled.
Matrix(rw)->set port broadcast fe.1.1-5 800