Security Configuration Command Set
Configuring Denial of Service (DoS) Prevention
Matrix NSA Series Configuration Guide 14-183
14.3.14Configuring Denial of Service (DoS) Prevention
Purpose
To configure Denial of Service (DoS) prevention, which will protect the router from attacks and
notify administrators via Syslog .
Commands
The commands used to configure DoS prevention are listed below and described in the associated
section as shown:
•show hostdos (Section 14.3.14.1)
•hostdos (Section 14.3.14.2)
•clear hostdos-counters (Section 14.3.14.3)
ROUTER: These comm ands can be executed when the device is in router mode only.
For details on how to enable router configu ration modes, refer to Section 2.3.3.