Enterasys Networks N Standalone (NSA) Series 4.4.4.1 show port mirroring

Configuring Port Mirroring
Setting Port Mirroring
4-90 Matrix NSA Series Configuration Guide
4.4.4.1 show port mirroring
Use this command to display the source and target ports for mirroring, and whether mirroring is
currently enabled or disable d for those ports.
show port mirroring
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display port mirroring information. In this case, fe.1.4 is configured as
a source port and fe.1.11 is a target, but mirroring is not currently enabled between the ports:
Matrix(rw)->show port mirroring
Port Mirroring
==============
Source Port = fe.1.4
Target Port = fe.1.11
Frames Mirrored = Rx and Tx
Port Mirroring status disabled.