Nothing appears on the LCD monitor when the camera’s dial switch is set to , , or .

Make sure that the batteries are installed correctly. See “Installing the batteries” on page 1-7.Also, make sure that you are using appropriate batteries and that they are charged. See “Replacing the batteries” on page 1-8and “Charging the batteries” on page 1-6.

The camera may have shut off automatically. Press the POWER button to turn the camera back on. Alternatively, you can turn the camera back on by pressing the shutter button or an LCD monitor button, depending on your camera’s dial switch position. See “Turning the camera back on” on page 4-21for more details.

Note:

The LCD monitor shuts off automatically when you use EPSON Photo!3.

The image on the LCD monitor is too dark, or is not visible at all.

Adjust the brightness of the LCD monitor, following the instructions in “Setting the LCD monitor’s brightness level” on page 4-21.

Make sure that the dial switch is set to

 

,

 

, or .

 

Note:

 

 

 

 

 

The LCD monitor shuts off automatically when you use

 

EPSON Photo!3.

 

 

 

 

 

You cannot take certain kinds of pictures or make the

 

settings that you want when using the LCD monitor.

 

Some of the camera’s settings and features cannot be

 

used at the same time. For example, you cannot use the

 

continuous shooting feature and the HyPict image

 

quality setting at the same time. For instructions on

 

 

making camera settings, see Chapter 2, “Taking

7

Pictures.”

 

 

 

 

 

 

 

 

 

 

To adjust the white balance, exposure, and sensitivity settings, you must first select the Program or Manual camera mode. See “Making camera mode settings” on page 4-5.

Maintenance and Troubleshooting

7-5