Adjusting the speaker volume

Follow these steps to adjust the volume of the built-in speaker.

1.Set the dial switch to and turn on the camera.

2.Press the Camera SETUP button.

3.Press the Volume button to adjust the speaker volume level.

4.Press BACK to return to the previous screen.

Setting the beep and shutter sound

You can choose to have the camera beep whenever you press an LCD monitor button and make a shutter sound whenever you take a picture, only make a shutter sound when you take a picture, or never make a sound. Follow these steps to change the sound setting.

Note:

To adjust the volume of the built-in speaker, see the previous section.

1.Set the dial switch to and turn on the camera.

2.Press the Camera SETUP button.

3.Press the button below Beep to select Always, Shutter, or Never. Then press the BACK button to return to the previous screen.

Selecting the signal system and language

In order to view your photos and video clips on a television, you need to choose either the NTSC or PAL signal system to meet your local

television broadcasting standards.

You can also choose English, Japanese, French, German, Italian, Portuguese, or Spanish (and Chinese in some areas), as the language used to display camera information on the LCD monitor.

To select the signal system and language, follow the steps below.

1.Set the dial switch to and turn on the camera.

2.Press the button.

3.Press the arrow icon buttons to move the cursor to the language of your choice.

4.Press the TV button to select NTSC or PAL.

5.Press the BACK button to save your selection.

4-22Making Settings