Epson 3000z Excluding or adding photos

3.	Press the Sound button to turn the playback of audio
	recordings on or off.
4.	The slide interval setting is displayed on the LCD
	monitor, directly below the sound setting. Press the
	button next to the slide interval to change the setting.
	You can choose between 3 Sec, 5 Sec, Shuffle, and

If you selected 3 Sec, 5 Sec, or Shuffle in step 4, Quit and Pause are displayed on the screen after you press Start. Press the Pause button to pause the slide show. Press it again to restart the slide show, or press the Rev or Fwd button to view the previous or next photo. Press the Quit button to cancel the slide show before it is finished.

Manual.

Note:

If you choose Shuffle, the photo changes automatically

every three seconds.

7. Once the slide show is finished, press the BACK button twice.

Excluding or adding photos

3

5.	To exclude certain photos from your slide show, or to
	rotate certain photos, press the Settings button. For
	details on excluding or adding photos, refer to the next
	section. For details on rotating photos, refer to
	“Rotating photos” on page 3-4.
6.	When you are ready to begin the slide show, press the
	Start button.
	If you selected Manual as the slide interval in step 4,
	Rev and Fwd are displayed on the screen after you press
	Start. Press the Rev button to view the previous photo,
	or press the Fwd button to view the next photo.

By default, all of the photos saved on the memory card in your camera are automatically included in a slide show. To exclude any of the photos from the slide show, or to add any previously excluded photos to the slide show, follow these steps.

1.Set the dial switch to , then turn on the camera.

2.Press the Menu Change button, then press the SLIDE SHOW button.

3.Press the Settings button.

To make selecting photos easier, you can display either four or nine photos at a time by pressing the button below Multi once or twice. A white frame appears around the selected photo.

Viewing and Managing Your Images 3-3