After you take a picture, the green indicator light blinks. This signals that the image has been captured and the camera is processing it. When the light stops blinking, the image is saved. Saved images remain in the memory card even when the camera is turned off, the batteries are removed, or the memory card is removed from the camera.
When the indicator light next to the viewfinder stops blinking, the camera is ready to take another picture.
Using the optical zoom feature
You can capture a smaller portion of the subject at a higher magnification using the optical (x3) zoom feature.
Your PhotoPC 3000Z’s optical zoom feature allows you to 2 increase the magnification of your images by as much as
three times. To use the optical zoom feature, press the W and T buttons on the back of the camera under the dial switch. To zoom out, press the W button. To zoom in, press the T button. You can use the optical zoom feature at any time when taking photos.
zoom out | zoom in |
(wide) | (telephoto) |
When using the zoom feature in the 
or 
dial position, the following zoom indicator appears at the top of the LCD monitor.
Taking Pictures