4.Turn the camera’s dial switch to or , then press

the image quality button on the top of the camera

until appears on the display panel.

5.Press the shutter button to take a TIFF photo.

Note:

After you take a TIFF photo, the camera takes approximately 32 seconds to process the image.

Setting the flash

The flash has the following effective ranges, depending upon the optical zoom ratio and whether or not the macro setting is used.

Wide (minimum zoom):

50-420 centimeters

Tele (maximum zoom):

50-340 centimeters

Macro:

20-50 centimeters

The effective flash range varies depending on the sensitivity setting (see page A-3for details).

Turn on the camera and press the button on the top of the camera to cycle through the flash settings. The settings appear on the display panel as shown below.

Automatic (default setting)

Red-eye reduction

Forced flash

Flash off

Slow synchro

(Program and Manual modes only)

The flash settings are as follows:

Automatic

The flash fires automatically whenever more lighting is needed.

4-4Making Settings