Note:
❏Print Mark can handle a maximum of 1,000 photos on each memory card. If the card contains more than 1000 photos, the program cannot access the photos in excess of the limit.
❏You can enlarge the preview of the selected photo
by pressing the 
magnification icon button at the
button to return to the normal selection screen.
7.Press the up and down arrow icon buttons to specify the number of copies of the selected photo to print. You can specify up to 99 copies. When you specify a value other than 00, a check mark appears on the selected photo. The value 00 implies no selection.
8.Repeat steps 6 and 7 to select other photos and specify the number of copies.
9.Press the BACK button. A message appears confirming the number of frames that are selected.
10.Press Done to accept your settings. If you change your mind, press BACK to return to the photo selection screen. To quit without making the new DPOF file, press Cancel.
11.If you want to print an index of the selected images in addition to the standard layout prints, press Add Index and proceed to the next step. If you do not need an index print, proceed to step 15.
12.Press the button next to Index print to choose None, Selected, or All. Refer to the chart below for details.
Setting | Result |
|
|
|
|
|
|
None | No index sheet will be printed. |
|
|
|
|
|
|
Selected | Index sheets containing only the selected |
|
|
| photos will be printed. |
|
|
| 5 | ||
|
|
| |
All | Index sheets containing all of the photos saved |
| |
|
| ||
| on the memory card will be printed, regardless |
|
|
| of your print selections. |
|
|
|
| ||
|
|
|
|
13.If you choose Selected or All, press the left and right arrow icon buttons to specify the number of copies of the index print to make. You can specify up to 99 index print copies.
14.Press BACK to return to the previous screen.
15.Press the Save button. A confirmation screen appears.
Using Print Mark to Print Photos