After the picture is taken, it remains displayed on the monitor until the camera finishes processing it. After the green indicator light comes on, you can take another photo or display or manage your photos. See “Viewing and Managing Your Images” on page
Using the basic playback feature
When you take photos using the LCD monitor, you can view the photos that you have already taken using the basic playback feature. Using this feature, you can view your photos without having to turn the dial switch to the 
position after taking a photo. To use the basic playback feature, you must first make some settings. Follow these steps.
Note:
❏Using this feature increases the amount of time that you must wait after taking a picture before you can take the next one.
❏You cannot view video clips using the basic playback feature.
1.Remove the lens cap, set the dial switch to 
, and turn on the camera.
2.Press the Shot SETUP button on the back of the camera.
Note:
For an explanation on using the buttons on the back of the camera, see “Using the LCD monitor buttons” on page
3.Press the Confirmation button to select On.
4.Turn the dial switch to 
and take a picture.
5.After the camera processes the photo, the 
icon appears briefly next to the
To delete the photo you just took, press the Delete button. Before taking more photos, press the BACK button.
During playback, you can enlarge or erase photos, view multiple photos, and play back audio recordings. Refer to the appropriate section below.
❏To enlarge photos, see “Magnifying photos” on page
❏To erase photos, see “Erasing images” on page
❏To change the number of photos that you can view on the LCD monitor at a time, see “Displaying one, four, or nine photos at once” on page