2.To display four photos at a time, press the Multi button once. Multi changes to 1/9, and small “thumbnails” of the last four photos you took appear on the screen, with the currently selected photo framed in white.
Press the 1/9 button to display nine photos at a time. 1/ 9 changes to 1/1.
3.Press the arrow icon buttons to select an photo with the white frame. Hold the button down to move through the photos quickly.
When the frame reaches the first or last photo in the current group, the previous or next group of photos is displayed.
4.To display only the currently selected photo, press the 1/1 button. 1/1 changes to Multi.
Magnifying photos
You can view a magnified version of the photos saved in your camera on the LCD monitor. Follow the steps below.
1.Set the dial switch to 
, then turn on the camera.
2.To magnify the currently displayed photo, press the 
button.
3.A magnified view of the photo appears, and an icon in the top left corner of the LCD monitor indicates the portion of the photo which is currently displayed. Scroll the screen up, down, right, or left using the arrow icon buttons. You can scroll quickly through the screen by holding down any one of the arrow icon buttons.
Note:
When magnifying a panoramic picture, you can only scroll left and right.
4.To exit the magnification screen, press BACK.
Viewing a slide show of your photos
The slide show feature plays back a series of photos on your camera’s LCD monitor. Your PhotoPC 3000Z’s slide show includes navigation features and gives you full control of the photos in your slide show. To use the slide show, follow the steps below.
Note:
To adjust the brightness of the LCD monitor, see “Setting the LCD monitor’s brightness level” on page
1.Set the dial switch to 
, then turn on the camera.
2.Press the Menu Change button, then press the SLIDE SHOW button.