2.Press Memory SETUP. The name of the folder currently being used appears on the right side of the LCD monitor, between the up and down arrow icons.

3.Press the up and down arrow icon buttons to change the folder, then press the BACK button.

Playing back video clips

The PhotoPC 3000Z allows you to view your video clips in a variety of ways. You can play them forward or in reverse, in slow motion, or one frame at a time in either direction, and you can fast forward or rewind them. Follow the steps below.

1.Set the dial switch to , then turn on the camera.

2.Press the Menu Change button, then press the Video Clip button. The first frame of the last video clip you took appears on the screen.

Note:

When there are no video clips saved on the camera’s memory card, the Menu Change button is disabled, or the message There is no video clip is displayed.

To display frames from four video clips at a time, press the Multi button once. Multi changes to 1/9, and small “thumbnail” images of the first frames from the last four video clips you took appear on the screen, with the currently selected video clip framed in white.

Press the 1/9 button to display nine frames at a time. 1/ 9 changes to 1/1.

3.To select the video clip that you want to play back, press the up and down arrow icon buttons.

4.To play the clip, press the Play button.

Note:

If audio was recorded with the video clip, the camera’s built-in speaker replays the audio during video playback. To adjust the volume of the built-in speaker, see “Adjusting the speaker volume” on page 4-22.

To play the clip in reverse, from the last frame to the first, press the Fwd button. The last frame of the video clip is displayed and Fwd changes to Rev. Then, press the Play button.

To play the clip in slow motion, press the Change Speed button during playback.

5.To pause the clip during playback, press the Pause button.

3-6Viewing and Managing Your Images