2.Set the dial switch to and turn on the camera.

3.Press the Shot SETUP button.

4.Leading or Trailing appears at the right side of the LCD monitor. Press the button next to this setting until Ext Flash is displayed.

5.Press the BACK button to return to the previous screen.

Making Camera Settings

When the camera’s dial switch is in the position, you can make certain camera settings, including setting the internal clock and changing the camera mode, the beep and shutter sound, the LCD monitor’s brightness level, the speaker volume, and the automatic shut-off time. You can also set the display language.

Setting the time and date

Follow the instructions in this section to set the time and date.

1.Set the dial switch to and turn on the camera.

2.The date (month, day, and year) and the time (hour and minute) appear at the upper-right corner of the LCD monitor. Press the button next to the date and time.

3.To adjust the value of the highlighted item, use the up and down arrow icon buttons.

To change which item is highlighted, use the right and left arrow icon buttons.

4.After setting the correct time and date, save the settings by pressing BACK.

Note:

❏You must reset the time if the camera is unplugged and the batteries are removed for more than one hour.

❏You can also set the time and date using your computer. See the EPSON Digital Camera Software User’s Guide for details.

4-20Making Settings