16.Press the Save button to save your settings. The main menu of the Print Mark program appears.
If you want to change the current settings, press the BACK button to return to the previous screen. To change which photos are selected or the number of prints, return to step 5. To change the index print settings, return to step 11.
17.Press the button below Exit to return to the program selection menu.
Printing an index of photos
Using the DPOF file, you can instruct the printer to print an index of the photos on your memory card. Follow these steps to make a new DPOF file.
1.Set the dial switch to 
and turn on the camera.
2.Press the PrintMark button. The Print Mark main menu is displayed.
3.Press the New settings button.
Note:
If a previous DPOF file exists, a message appears to confirm that you want to delete it. Press Done to continue or Cancel to quit.
4.Press the Index button to select a
5.Press the Index print button to select All or Selected. Refer to the chart below for details.
Setting | Result |
|
|
All | Index sheets containing all of the photos saved |
| on the memory card will be printed. Skip to |
| step 12. |
|
|
Selected | Index sheets containing the selected photos |
| will be printed. Proceed to the next step. |
|
|
Note:
Print Mark can handle a maximum of 1,000 photos on each memory card. Even if you select All, the program cannot access the photos in excess of the limit.
6.If you chose Selected, press the Select Image button to specify the photos that you wish to include in your index print.