Enabling the fixed settings feature

Follow these steps to enable the fixed settings feature.

1.Make sure that Manual is selected as the camera mode. See “Making camera mode settings” on page 4-5for details.

2.Turn the camera’s dial switch to the position and press the Shot SETUP button.

3.Press the FixSet button to select On. Then press the Back button.

Proceed to the next section for details on saving your fixed settings.

Saving your fixed settings

Follow these steps to save your fixed settings.

1.After you have enabled the fixed settings feature, turn the dial switch to .

Note:

You cannot use the fixed settings feature when taking pictures using the viewfinder.

2.Press the button at the top-right of the LCD monitor several times until Fixed Settings is displayed.

3.Take a picture. After the camera processes the photo, the exposure settings that were used for that photo are displayed on-screen.

To save the displayed settings, press the Yes button.

If you do not want to save the displayed settings, press the No button. Repeat this step until you are satisfied with the displayed settings.

4.To take a picture using the saved settings, simply frame a shot and press the shutter button. To exit the fixed settings feature, click BACK.

Note:

To use the fixed settings after exiting this screen, see the next section.

To see the current fixed settings, press the Fixset Info button.

To erase the current fixed settings from the camera’s memory, press the Fixset Cancel button.

4-16Making Settings