2.Tighten the screw sleeve on the fastener as shown below to close it.
screw shut to secure
3.After securely closing the fastener, turn it so that the screw sleeve is covered by the strap, as shown below.
4.Repeat steps 1 through 3 to attach the other end of the strap to the other side of the camera.
Attaching the lens cap to your camera
After you have attached the camera strap, you can attach the lens cap to your camera using the lens caps string. To attach the string to the lens cap and then to the camera, follow these steps.
1.Pass the end of the string with the smaller loop through the eyelet on the edge of the lens cap, then pass the other end of the string through the smaller loop and pull it tight as shown below.