Note:
❏The settings that you make in the 
dial position remain when you use the time lapse feature. To make
settings, turn the dial switch to 
and make the appropriate settings before using the time lapse feature.
❏You cannot take TIFF files when using the time lapse feature.
1.Secure the camera on a flat surface or tripod.
2.Remove the lens cap, turn the dial switch to 
, and turn on the camera. Push the Mode Change button until CONTINUOUS is displayed at the top of the LCD monitor. A red frame appears around the previewed image and CONTINUOUS is displayed at the top of the LCD monitor.
3.Press the Mode Change button. INTERVAL is displayed at the top of the LCD monitor.
4.The hours, minutes, and seconds appear in the center of the screen with the seconds highlighted. Press the up and down arrow icon buttons to change the value of the highlighted time unit. To highlight a different time unit, press the left and right arrow icon buttons.
If you wish to quickly select either the longest or the shortest available interval, you can toggle between 24 hours and the shortest available interval by pressing the Max/Min button.
Note: | 2 |
The shortest available interval varies depending on the current image quality, shutter speed, and audio recording settings.
5.Once you have set the desired interval, frame the subject in the LCD monitor and press the shutter button to begin taking photos.
Note:
❏The camera may turn off automatically after you take the first picture. It automatically turns back on to take pictures at the specified time.
❏When using the self timer feature, the camera takes a photo ten seconds after you press the shutter button, then continues taking photos at the specified time lapse interval.
6.To turn off the time lapse feature, press the POWER button while appears on the camera’s display panel.
Taking Pictures