7.Press the left and right arrow icon buttons to select a photo that you wish to include with the white frame. The number at the bottom in the LCD monitor shows the frame number.

Note:

You can enlarge the preview of the selected photo by

pressing the magnification icon button. Press the BACK button to return to the normal selection screen.

8.Press the up and down arrow icon buttons to specify the number of copies of the selected photo to print in each index. You can specify up to 99 copies. When you specify a value other than 00, a check mark appears on the selected photo. The value 00 implies no selection.

9.Repeat steps 7 and 8 above to select other photos to include and to specify the number of copies.

10.Press the BACK button.

11.Press the Done button to confirm your settings. If you change your mind, press the BACK button to return to the photo selection screen. To quit without making the new DPOF file, press Cancel.

12.Press the right and left arrow icon buttons to specify the number of copies of the index to print. You can specify up to 99 index print copies.

13.Press the Save button. A confirmation screen appears.

14.Press the Save button to save your settings. The main menu of the Print Mark program appears.

If you want to change the current settings, press the BACK button to return to the previous screen. To change all or just selected photos are included in your index print, return to step 5.

15.Press the Exit button to return to the program selection menu.

5

Confirming and Changing the DPOF File

To confirm or change the current DPOF settings using Print Mark, follow the steps below.

1.Set the dial switch to and turn on the camera.

2.Press the PrintMark button. The Print Mark main menu is displayed.

3.Press the Confirm button to show the confirmation screen. The current DPOF settings are displayed on the LCD monitor.

Using Print Mark to Print Photos 5-5