Charging the batteries

The Ni-MH Battery Charger charges your Ni-MH rechargeable batteries quickly for use in your camera.

If you are using alkaline batteries, see “Installing the batteries” on page 1-7

Before charging your batteries, read the safety instructions outlined in “When using the charger and batteries” on page 5.

wWarning:

❏Do not use the Ni-MH Battery charger with any batteries other than the Ni-MH rechargeable batteries supplied with your printer (Model EU- 24).

❏Always charge batteries from the same package as a set. Do not mix old and new batteries.

Follow the steps below to charge your Ni-MH batteries.

1.Insert the batteries into the compartments, positioning the + and - ends as shown.

c Caution:

You must charge four batteries at a time.

2.Connect the power cord to the battery charger as shown below.

charger light

3.Plug the power cord into an electrical outlet. The red charger light turns on, indicating that the charger is working.

c Caution:

Make sure that all plugs and connectors are firmly and completely connected.

1-6Getting Started