Removing and Installing Ink Cartridges
Follow these steps to replace either or both ink cartridges:
1.Make sure the printer is on and not printing, and that one of the Ink Out lights is flashing or turned on.
2.Lower the output tray on the front of the printer (if necessary) and then lift up the printer’s cover.
3.Hold down the Load/Eject button for about five seconds until the print head moves slightly left to the ink cartridge install position. The Power light begins flashing.
Caution:
c Do not move the print head with your hand. Always use the Load/Eject button to move it.
4.Pull up the cartridge clamp to open it. The cartridge rises partially out of the printer. (If you do not do this within 30 seconds after pressing Load/Eject, the carriage returns to its home position, far right. If this happens, press
Load/Eject again.)
Maintenance