2.Lower the output tray and lift up the printer cover.
3.Hold down the Load/Eject button on the control panel for about five seconds until the print head moves slightly left, to the ink cartridge install position. The Power light begins flashing.
Caution:
c Never move the print head by hand; always use the Load/Eject button to move it.
4.Pull up each of the ink cartridge clamps to open them. (If you don’t do this within 30 seconds after pressing Load/Eject, the printer automatically moves the print head back to its home position, far right. If this happens, press Load/Eject again.)
protective sheet