Caution:
c Once you install an ink cartridge, do not open the ink cartridge clamp again or remove the cartridge except to replace it with a new one. Once you remove a cartridge, do not reuse it; this may damage the print head.
9.Press the Load/Eject button again. The printer moves the print head to its home (far right) position and the Power light flashes as the printer charges the ink delivery system.
c
Note:
Caution:
The Power light continues to flash while the printer performs the ink charging operation. Never turn off the printer while the Power light is flashing, as this can result in incomplete charging of printer ink.
Even if you do not press the Load/Eject button, the printer moves the print head back to its home position about 30 seconds after you replace the cartridge.
10.When the charging cycle is finished (the Power light stops flashing), close the printer cover. Now the printer is ready for your next print job.
Cleaning the Printer
If you want to clean the printer, follow these steps:
1.Turn off the printer and disconnect any cables connected to it. Be sure to keep the printer cover closed as you clean it.
2.Remove any paper or other media from the sheet feeder.
3.Carefully clean away loose dust and dirt with a soft brush.