Caution:

c Make sure that the printer name you selected and the actual printer to be calibrated are the same, and confirm that this printer is connected to the port you selected. Otherwise, the printer will be damaged.

4.In the next screen, click the Preview button to print the calibration patterns in the Choose pattern pull-down menu. Use this printout to select the pattern(s) that need to be calibrated.

5.Look at the printed patterns, and select the misaligned pattern in the Choose pattern pull-down menu. For example, if the lines shown under Pattern 2 need to be aligned, select Pattern 2; then click Start.

The printer prints some alignment patterns. Each pattern is associated with an offset value. Look for the alignment pattern that is most closely aligned.

6.After the pages have printed, you see a dialog box requesting the number of the pattern that is most closely aligned.

Enter the appropriate number and click OK.

7.Repeat steps 5 and 6 until you are satisfied that all of the patterns are aligned.

8.To close the calibration utility, click Quit.

9.Turn off the printer to save the settings.

Note:

The settings made with the Bi-D Calibration utility are saved only when you turn off the printer.

Maintenance 6-13