Calibrating the Printer Using Windows
If you are using Windows on your PC, follow the steps below to calibrate the printer. If you installed the Windows printer driver, the Calibration utility is installed on your hard disk.
1.If you are using Windows 3.1, select the EPSON Printer Calibration icon in the EPSON program group to start the utility.
If you are using Windows 95, first make sure the Spool Manager despooler is closed (not just minimized). Then click Start. Point to Programs, Epson, and then click
EPSON Printer Calibration to start the utility.
2.When you see the Printer Calibration Utility screen, select
OK.
3.Make sure your printer is selected in the
4.Click Next. Make sure the selected printer port is correct. If you are not sure which port the printer is connected to, check your print manager utility. Then click Next.
Caution:
c Make sure that the printer name you selected and the actual printer to be calibrated are the same, and confirm that this printer is connected to the port you selected. Otherwise, the printer will be damaged.
5.Make sure the printer is on and paper is loaded. Then click Next to print the Current Alignment Sheet.
6.Click the misaligned pattern. (If more than one pattern is misaligned, click a misaligned pattern now. After you finish the steps in this section, repeat steps 1 through 9 to select and calibrate each remaining misaligned pattern.)