6.Follow the instructions on the screen to choose the print head you want to calibrate. Then select Next.
7.Make sure the printer is on and paper is loaded. Then select Next to print the Current Alignment Sheet.
8.Select the misaligned pattern. (If more than one pattern is misaligned, select a misaligned pattern now. After you finish the steps in this section, repeat steps 4 through 11 to select and calibrate each remaining misaligned pattern.)
9.Select Next twice to print the pattern’s Test Alignment Sheet. This printout contains numbered line groups with varying alignment.
10.Select the number of the line group with the best appearance and then select Next to calibrate the printer.
11.To check the calibration results and exit the Calibration utility, select Print.
Calibrating the Printer Using a Macintosh
If you have a Macintosh, follow the steps below to calibrate your printer.
Note:
If the Status Monitor utility is running, click Quit to close it before you start the calibration utility.
1.
2.When you see the screen to select a printer type, choose your printer name from the list and click OK.
3.Select the port to which your printer is connected.