5.When you see the Printer Utility Setup dialog box, highlight Epson Stylus COLOR 500 and click OK. The installation program begins copying the files. You see a screen showing the progress of the installation as it proceeds.

6.When you see the prompt to insert Setup Disk 2, remove Disk 1 and insert Disk 2. Click OK.

After a few moments, the installation program creates the EPSON program group in Windows containing these icons:

Spool Manager 3

EPSON Printer Calibration

EPSON Stylus COLOR 500 Help

EPSON Stylus ReadMe

7.When you see the message that the installation is complete, click OK to exit Setup.

The installation program automatically selects the EPSON Stylus COLOR 500 printer as your default printer for Windows applications. It also assigns the printer driver to port LPT1. If this configuration matches your system, go on to page 2-9 for information on accessing the driver. If you need to change the default printer driver or the port assignment, see the next section.

Note:

If you installed the printer software using Windows 3.1 and will upgrade to Windows 95 later, you will need to reinstall it using the steps beginning on page 2-5 after you install Windows 95. This sets up the driver correctly for Windows 95.

Installing and Using the Windows Printer Software 2-3