Using the Default Setting Mode
Additional printer functions are available through the Default setting mode. Because the printer’s factory defaults are designed to meet the needs of almost all users, you rarely need to change the printer functions listed below. If necessary, however, you can turn on the Default setting mode and change the settings using the control panel buttons.
The table below lists the settings and available options, with default settings in bold type. Detailed descriptions follow the table.
Setting | Options |
|
|
Print direction | Auto, |
|
|
Font | Courier, Roman, Sans Serif, Prestige, |
| Script, Roman T, Sans Serif H |
|
|
Pitch | 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi, |
| Proportional |
|
|
Interface mode | Auto, Parallel, Serial |
|
|
Auto interface wait time | 10 seconds, 30 seconds |
|
|
Software | ESC/P 2, IBM X24E |
|
|
Auto CR (IBM mode only) | Off, On |
|
|
AGM (IBM mode only) | Off, On |
|
|
Character table | PC437, PC850, PC860, PC861, PC863, |
| PC865, Abicomp, BRASCII, Italic U.S.A., |
| Italic France, Italic Germany, Italic U.K., |
| Italic Denmark, Italic Sweden, Italic Italy, |
| Italic Spain I |
|
|
Auto line feed | Off, On |
|
|
Network interface mode | Off, On |
|
|
Loading position | 3 mm, 8.5 mm |
|
|
Thick paper | Envelope, Index card (portrait) |
|
|
Economy | Off, On |
|
|