Changing the Default Settings
To change the printer’s default settings, you use the control panel buttons; the control panel lights show your selections.
1.Make sure the printer is turned off and paper is loaded.
2.Hold down the Load/Eject button and turn on the printer, continuing to hold down the button until the printer starts printing an instruction sheet.
3.Use the instructions to change the settings from the control panel.
4.After making your changes, wait until the printer stops printing, and then turn off the printer to exit the Default setting mode.
Note:
❑You can exit the Default setting mode any time by turning off the printer. Any changes you have made remain in effect until you change them again.
❑If you want to check the current default settings, enter the Default setting mode again and print the current settings.
Controlling the Printer