Viewing Lamp Usage and Other Information

Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used.

Press the Menu button and highlight the Info menu.You see the lamp usage hours and various input signal settings on the right.

The life span of the lamp is about 2000 hours if the Brightness Control setting in the Setting menu is set to High (default), and 3000 hours if the Brightness Control setting is set to Low. Make sure you have a spare lamp handy if the usage hours on this menu are close to the life span of your lamp.

Solving Problems with the Image or Sound

No image appears on the screen.Check that the Power light is green, not flashing, and the lens cap is off.

The projector may be in Standby or Sleep Mode. If the Power light is orange, press the PPower button to turn the projector on.

If the power was switched off and then on again, the projector may be cooling down. Wait until the Power light stops flashing and remains orange; then press the PPower button again.

Press the A/V Mute button to make sure the picture has not been turned off temporarily.

The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.

note

The information displayed depends on the input signal currently selected.

Solving Problems 105