Adjusting Color Corrections for a New Surface

Adjust the correction values if you’re projecting on a new surface or in a new location.

1.Press the Wall Shot button on the remote control or projector while you’re projecting an image. Make sure Wall Shot is on.

2.Press the Wall Shot button a couple of times until you see Wall Shot Readjustment as the status in the upper right corner of your screen.

You see a sequence of colors flash for about five seconds as the projector adjusts the color correction values for the new projection surface.

Operating Your Computer with the Remote Control

If you’ve connected a computer to the projector with a USB cable, as described on page 49, you can use the remote control in place of your computer’s mouse. This gives you more flexibility when delivering slideshow-style presentations, since you won’t have to stand next to the computer to change slides.

■Use the Page buttons to move through a slideshow.

Page up or down

to change slides in PowerPoint

Using the Remote Control 41