Controlling Multiple Projectors

If you’re using more than one projector for your presentation, you can switch between them using a single remote control. To do this, you need to set a different ID for each projector. During the presentation, you can change the remote control’s ID to match that of the projector you want to use.

Setting the Projector IDThe projector’s default ID is 1. Follow these steps to change it:

1.Press the Menu button on the remote control. You see the projector’s menu screen.

2.Select the Extended menu and press Enter.3.Highlight Projector ID and press Enter.4.Choose an ID value for the projector and press Enter.5.When you’re done, press Esc to exit the menu system.

note

By default, the remote control’s ID is set to zero, which allows it to control any projector. If you want to control multiple projectors simultaneously, and you don’t want to switch between them (each projector would need its own screen), you can leave the remote control’s ID set to zero.

Fine-Tuning the Projector 73