Epson 830p Managing Projectors, ■Using a browser to monitor the projector, Use EMP NetworkManager to send messages by, This chapter covers the following information:

note

If you’re using a network management utility running SNMP, you can configure your network to send trap alerts even without a plug-in (see page 80). This feature is intended for use by network administrators only.

Managing Projectors

The EasyManagement software for your projector lets you monitor and control your projectors from a remote computer:

■Use EMP Monitor (available for Windows only) to see your projectors’ status, switch image sources, and control basic settings.

■Use EMP NetworkManager to send messages by e-mail, notifying you when a problem occurs with a projector.

■Use a network management utility running SNMP, such as HP OpenView, to manage your facility’s equipment from a pre-existing system.

To use the EasyManagement software to manage your projectors, first install EMP Monitor as described on page 114. Then connect and configure each projector you want to monitor. You can connect the projector over a wired network (as described on page 80).

This chapter covers the following information:■Connecting the projector to and configuring it for a wired network■Monitoring and controlling your projector with EMP Monitor■Using a browser to monitor the projector

79