Epson 830p Add, Click, Close, Auto detect, Register projector, Manual registration, 2. Click Register projector. You see this screen:

2. Click Register projector. You see this screen:

Click here

3.Click Auto detect to locate projectors currently operating on the network, or click Manual registration and enter the projector’s network IP address.

Any projectors found on the network are listed as shown below:

Click here

4.Select each projector you want to add by clicking its name, then clicking the Add button. When you’re done, click Close.

note

If Auto detect fails to find the projector, your projector may not be connected or configured correctly for the network. See page 80 to configure your projector for a wired network.

Managing Projectors 83