Epson 830p Using EMP NetworkManager, Selecting the Projectors to Monitor, 1.To start EMP NetworkManager, click Start > Programs or

Using EMP NetworkManager

You can use EMP NetworkManager to send messages by e-mail, notifying you when a problem occurs with a projector. Before running EMP NetworkManager, make sure you’ve installed the software as described on page 114. Then follow the steps below to create e-mail settings for each projector you want to monitor.

Selecting the Projectors to Monitor1.To start EMP NetworkManager, click Start > Programs or

All Programs > EPSON Projector > EMP NetworkManager.

You see the EMP NetworkManager screen. The projectors you’ve already registered through EMP Monitor appear as icons.

2.If you’d like to register a projector manually and you know its IPaddress, double-click the Projector address selection icon. You see this screen:

3.Enter the projector’s IP address and click Add. The projector’s icon is added to the EMP NetworkManager screen.

Managing Projectors 89